Published: 9/9/2012
After swapping a 3800 into our Fiero, I had to pull it back out to tweak the cam position sensor magnet. This is a timelapse of the process of pulling the engine and re-installing it.
Tagged: Fiero 3800 Project
Previous in Fiero 3800 Project: Fiero 3800 First Start
Next in Fiero 3800 Project: Fiero Trunk Floor Pan
If this is the kind of thing you're into, you might enjoy my other videos. If you have any questions or comments, please drop me a line.
Aaron D. Parks